Dear business partners,
For the coming Easter we send you ourbest wishes and blessings.
Your O-METALL Team
O-METALL LUXEMBURG S.A.
Marketing-Business-Center
L- 9753 Heinerscheid
info@o-metall.com
Tel.: +352 997 323 20
Don’t forget: O-METALL Luxembourg and O-METALL Austria will be open on Friday 29/03/24 (Good Friday). So if you are interested in trapezoidal sheet, sandwich panels, metal roof tiles, fasteners or other products, do not hesitate to visit us. We are looking forward to meet you.
O-METALL LUXEMBURG S.A.
Marketing-Business-Center
L- 9753 Heinerscheid
info@o-metall.com
Tel.: +352 997 323 20
To ensure a high level of watertightness, sandwich panels as well as profiled sheets and light panels that are screwed to the raised bead or top chord should be fastened with storm washer. These are made of corrosion-resistant aluminum and have a full-surface seal on the underside. This and the use of sealing screws permanently prevent water from entering the drill hole.
By increasing the contact surface, storm washers also increase the frictional connection between the sheet and the substructure and make the roof more resistant to extreme weather conditions.
In most cases, stainless steel sealing screws with a drill point are used to install our products. Our sealing screws are available in a wide range of variants for all common products and substructures, also available with matching painted screw heads on request.
O-METALL LUXEMBURG S.A.
Marketing-Business-Center
L- 9753 Heinerscheid
info@o-metall.com
Tel.: +352 997 323 20
Sandwich wall panels with visible fixing are considered to be one of the most economical wall systems. The panels are screwed together with special sealing screws from the outside through the outer shell, the insulating core and the inner shell. The advantages of this system are its quick and easy installation, excellent insulation value, very good value for money and the ability to replace individual panels if repairs are required. For a attractive appearance, you can use the screws with heads matching the color of the panels.
O-METALL LUXEMBURG S.A.
Marketing-Business-Center
L- 9753 Heinerscheid
info@o-metall.com
Tel.: +352 997 323 20
The use of sandwich wall panels with concealed fixings creates an aesthetically pleasing building façade without visible screws. The screws and load distribution plates in the screw joint are concealed by the joint cover of the next panel. In addition to an attractive appearance, the cover offers increased protection against external influences.
The use of load distribution plates at the fixing points also ensures optimum fixing forces and can enable larger spans.
O-METALL LUXEMBURG S.A.
Marketing-Business-Center
L- 9753 Heinerscheid
info@o-metall.com
Tel.: +352 997 323 20
