PROFIT PANEL ROOF EXPORT

Dimensions on the profile sketch in millimetres

PRODUCT PROPERTIES – THE FAVORABLE SANDWICH PANEL

PROPERTIESUNITPPD30ExPPD40ExPPD50ExPPD60ExPPD80ExPPD100ExPPD120Ex
CORE THICKNESS (h)*mm3040506080100120
U-VALUEW/m².K0,710,550,440,370,280,220,19

* Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.

TECHNICAL PROPERTIES

OUTER SHELLO-METALL® trapezoidal sheet, heat-treated fully galvanised steel
Steel thicknesses 0.40 to 0.80mm
Polyester colour coating (POL) 25µm standard, other coating systems available up to 200μm
INSULATION CORECFC- and HCFC-free, density approx. 40kg/m³
Polyurethan hard foam (PUR) or polyisocyanurat hard foam (PIR)
INNER SHELLAluminium foil with robust stucco structure (ALF) or
Raw felt board impregnated with special bitumen (BI) or
Glass fibre reinforced plastic (GFK)
PRODUCTION LENGTHContinuously from 2,00 to 13,60m, Special lengths upon request
OTHERAll inner shells are ammonia-resistant and corrosion-resistant
Large range of standard colours – special colours on request
Minimum production quantity 200m²
Low dead weight
EXTRAS (on request)Foam cut-back, mounting direction freely selectable
A-sided packaging for octopus installation
Outer shell available in aluminium – colours on request
Production and transport of excess lengths

STANDARD COLOURS (0,50mm)

Attention: Colour deviations possible. For exact colour representation please use a RAL card.

PRODUCT CHARACTERISTICS

O-METALL® profit panel roof is the cheapest sandwich panel with upper and lower shell. It is particularly suitable for agricultural buildings, renovations and for buildings where a particularly light and robust roof covering is required. Depending on the requirements, our profit panel is available with an inner shell made of aluminium foil (ALF), bitumen foil (BI) or glass fibre plastic (GFK).

SUITABLE ACCESSORIES

HOW WOULD YOU LIKE TO MAKE AN REQUEST?

    YOUR PRODUCT INFORMATION

    DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

    YOUR PRODUCT INFORMATION


    Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

      YOUR PRODUCT INFORMATION

      DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

      YOUR PRODUCT INFORMATION


      Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

        YOUR INFORMATION


        Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.