PANEL TP27 SINGLE SKIN

Dimensions on the profile sketch in millimetres

PRODUCT PROPERTIES – INNOVATIVE AND COST-EFFECTIVE

PROPERTIESUNITTP27 ES-04TP27 ES-05TP27 ES-06
CORE THICKNESS (h)mm101010
TOTAL THICKNESSW/m².K1.441.441.44
OUTER SHELLmm0.400.500.60

*Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.

TECHNICAL PROPERTIES

OUTER SHELLO-METALL® trapezoidal sheet 27.112.8
Heat-treated fully galvanised steel, steel thicknesses 0.40 to 0.60mm
Polyester colour coating (POL) 25µm standard, other coating systems available up to 200μm
PUR-LAYERHCFC-free, density approx. 60kg/m³
Polyurethane hard foam (PUR)
INNER SHELLStandard: None
Optional: Aluminum foil (ALF)
OTHERExtra-large overlap of one high and one low bead
Various range of standard colours – special colours on request
EXTRAS (on request)Foam back-cut, mounting direction freely selectable
Crimp curving with different bending radii possible
Aluminum foil (ALF) with rigid stucco texture

STANDARD COLOURS (0.50mm)

Attention: Colour deviations possible. For exact colour representation please use a RAL card.

PRODUCT CHARACTERISTICS

The O-METALL® TP27 panel with a polyurethane (PUR) underside is an innovative and favourable panel suitable for both roof and wall mounting. Many advantages are combined in one product: an extremely high stability is given by its highly efficient profile geometry and the 10mm polyurethane foam connected shear-resistantly to the upper shell. Furthermore, compared to standard trapezoidal sheets, it has, albeit low, thermal insulation, sound insulation, anti-drip function and is ammonia-resistant on the underside.
In addition to its high stability, it is very light, quick and easy to mount and it offers good resistance to hail. This sandwich panel is delivered with a single shell. On request an aluminium foil (ALF) with a rigid stucco structure can be supplied on the inner side. Because of the special, extra wide and highly weather-resistant overlap geometry, the invoiced panel width is corresponding to the total width (RB).

SUITABLE ACCESSORIES

HOW WOULD YOU LIKE TO MAKE AN REQUEST?

    YOUR PRODUCT INFORMATION

    DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

    YOUR PRODUCT INFORMATION


    Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

      YOUR PRODUCT INFORMATION

      DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

      YOUR PRODUCT INFORMATION


      Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

        YOUR INFORMATION


        Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.