Dimensions on the profile sketch in millimetres
PRODUCT PROPERTIES – INNOVATIVE AND COST-EFFECTIVE
PROPERTIES | UNIT | SWE4 | SWE5 | SWE6 |
---|---|---|---|---|
CORE THICKNESS (h) | mm | 10 | 10 | 10 |
TOTAL THICKNESS | W/m².K | 1.44 | 1.44 | 1.44 |
OUTER SHELL | mm | 0.40 | 0.50 | 0.60 |
*Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.
TECHNICAL PROPERTIES
OUTER SHELL | O-METALL® corrugated sheet, heat-treated fully galvanised steel Material thicknesses 0.40mm – 0.45mm – 0.50mm – 0.60mm – 0.70mm – 0.80mm Colour coating 25μm polyester |
INSULATION CORE | HCFC-free polyurethane hard foam (PUR), density approx. 60kg/m³ HCFC-free polyisocyanurate hard foam (PIR), density approx. 40kg/m³, B-s2-d0 / B-s1-d0 |
INNER SHELL | Standard: without Optional: aluminum foil (ALF) |
PRODUCTION LENGTH | Continuously from 2.00 to 14.00m, Special lengths upon request |
OTHER | Extra-large overlap of one high and one low bead Effective width 896mm, total and invoiced width 1000mm |
OPTION (on request) | Foam back-cut between 70 and 300mm, mounting direction freely selectable Various coating systems up to 200μm for outer shell Crimp curving with different bending radii possible |
STANDARD COLOURS (0.50mm)
Attention: Colour deviations possible. For exact colour representation please use a RAL card.
PRODUCT CHARACTERISTICS
The O-METALL® panel single-skin is an innovative and favourable sandwich panel suitable for both roof and wall mounting. Many advantages are combined in one product: an extremely high stability is given by its highly efficient profile geometry and the 10mm polyurethane foam connected shear-resistantly to the upper shell. Compared to standard corrugated metal sheets it provides a minimum thermal insulation, a sound insulation, an anti-drip function and it is ammonia-resistant on the underside. In addition to its high stability, it is very light, quick and easy to mount and it offers good resistance to hail. This sandwich panel is delivered with a single shell. On request an aluminium foil (ALF) with a rigid stucco structure can be supplied on the inner side. Because of the special, extra wide and highly weather-resistant overlap geometry, the invoiced panel width is corresponding to the total width (RB). The application possibilities for this product are almost unlimited. |
SUITABLE ACCESSORIES