SANDWICH PANEL WALL SB

*Standard widths, other wall widths on request / Dimensions Profile sketch in millimetres

PRODUCT PROPERTIES – WALL TONGUE AND GROOVE SYSTEM FOR VISIBLE FIXING (SB)

PROPERTIES	UNIT	WP40 SB	WP60 SB	WP80 SB	WP100 SB	WP120 SB	WP140 SB	WP150 SB	WP160 SB	WP170 SB	WP200 SB	WP220 SB	WP250 SB
CORE THICKNESS (h)	mm	40	60	80	100	120	140	150	160	170	200	220	250
U-VALUE	W/m².K	0.51	0.34	0.26	0.22	0.18	0.16	0.15	0.14	0.13	0.11	0.09	0.085

TECHNICAL PROPERTIES

OUTER SHELL	Optical profile slightly lined (LL), micro lined (ML) or flat (GL) Material thicknesses 0.50mm – 0.63mm – on request 0.75mm Colour coating 25μm polyester
INSULATION CORE	CFC- and HCFC-free, approx. 96% closed-cell, density approx. 40kg/m³ Polyurethane hard foam (PUR) or polyisocyanurate hard foam (PIR) TCR 023 FPC B-s2-d0, limited contribution to fire according to EN 13501.1
INNER SHELL	Optical profile slightly lined – other on request, heat-treated fully galvanised steel Material thicknesses 0.40mm – 0.45mm – 0.50mm – 0.63mm – on request 0.75mm DU- or polyester colour coating
OTHER	Large range of standard colours – Special colours on request. CE-marking according to EN 14509
OPTION (on request)	Various coating systems up to 200μm for outer and inner shell Inner shell in stainless steel (VA) Production and transport of excess lengths

PRODUCT CHARACTERISTICS

The O-METALL^® sandwich panel wall with PIR/PUR insulation core combines excellent thermal insulation properties with a good fire behaviour. A high degree of prefabrication and the fast and cost-effective mounting make the O-METALL^® sandwich panel a particularly economic solution for the agricultural sector, industrial and commercial construction and also for private applications. For the outer and inner shell, you can choose among the optical profiles “slightly lined” (LL), “micro lined” (ML) and “flat” (GL). You can also choose between the variants “visible fixing” (SB) and “hidden fixing” (VB). The mounting of the O-METALL^® sandwich panel wall with “visible fixing” is done through the panels as a direct screw connection, which guarantees a high load transfer. In opposition to this, no screws remain visible on the façade if wall panels with “hidden fixing” are used. Fixing is done with help of sealing screws and load distribution plates. Both variants combine in one single product aesthetics, excellent thermal insulation and very good fire protection properties. For technical reasons, it is possible that the panel joint and the cover width may vary depending on the production plant and core thickness.

SUITABLE ACCESSORIES