You are here: / / / 10.100.11

GATE & WALL PROFILE 10.100.11

Dimensions on the profile sketch in millimetres

PRODUCT PROPERTIES

PROPERTIESUNIT063075
MATERIAL THICKNESSmm0.630.75
WEIGHTkg/m²6.037.18

Especially suited for doors & gates

MAKE A NON-BINDING REQUEST RIGHT NOW

TECHNICAL PROPERTIES

MATERIALHeat-treated steel
CORROSION PROTECTIONFully galvanised
COATING OUTSIDEPolyester colour coating
COATING INSIDERear side protective coating (RSL)
EFFECTIVE WIDTH1100mm
STANDARD LENGTH2.00 to 8.00m, Special lengths upon request
OPTION (on request)Various coating systems
CERTIFICATES/STANDARDSCE-marking
Fire behaviour A1 according to EN 13501-1

PRODUCT CHARACTERISTICS

• excellent corrosion protection • long service life • several standard colours available • low dead weight • thanks to a lowest possible profile height of 10mm, excellent suitability as door or gate cladding • can be used as wall cladding (substructure with small distances between supports or on planking) • maximum span width 50cm (wall) • can be mounted horizontally or vertically • not suited for roof covering

SUITABLE ACCESSORIES

ALTERNATIVE PRODUCT

As an alternative to this product we can offer you the profile 8.100.11.

SHOW

HOW WOULD YOU LIKE TO MAKE AN REQUEST?

REQUEST PRODUCT DIRECTLYDIRECT REQUEST WITH CALLBACKPLEASE CALL ME BACK
PreviousNext

    YOUR PRODUCT INFORMATION

    DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

    YOUR PRODUCT INFORMATION


    Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

      YOUR PRODUCT INFORMATION

      DO YOU HAVE ANY OTHER COMMENTS OR QUESTIONS?

      YOUR PRODUCT INFORMATION


      Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.

        YOUR INFORMATION


        Due to the use of different roll forming lines respectively production facilities, there may be deviations in the profile geometry (for sandwich panels also joint details). However, functionality is in no way impaired.