SANDWICH PANEL WALL VB

Dimensions on the profile sketch in millimetres

PRODUCT PROPERTIES – FOR AN AESTHETICALLY SOPHISTICATED FACADE CLADDING

PROPERTIES	UNIT	WP60 VB	WP80 VB	WP100 VB	WP120 VB	WP140 VB	WP150 VB	WP160 VB	WP170 VB	WP200 VB
CORE THICKNESS (h)	mm	60	80	100	120	140	150	160	170	200
U-VALUE	W/m².K	0.39	0.28	0.22	0.19	0.16	0.15	0.14	0.13	0.11

TECHNICAL PROPERTIES

OUTER SHELL	Optical profile slightly lined (LL), micro lined (ML) or flat (GL) Material thicknesses 0.50mm – 0.63mm – on request 0.75mm Colour coating 25μm polyester
INSULATION CORE	CFC- and HCFC-free, approx. 96% closed-cell, density approx. 40kg/m³ Polyurethane hard foam (PUR) or polyisocyanurate hard foam (PIR) TCR 023 FPC B-s2-d0 / B-s1-d0, limited contribution to fire according to EN 13501.1
INNER SHELL	Optical profile slightly lined – other on request, heat-treated fully galvanised steel Material thicknesses 0.40mm – 0.45mm – 0.50mm – 0.63mm – on request 0.75mm DU- or polyester colour coating
OTHER	Large range of standard colours – Special colours on request. CE-marking according to EN 14509
OPTION (on request)	Various coating systems up to 200μm for outer and inner shell Production and transport of excess lengths

PRODUCT CHARACTERISTICS

A large number of panel types can be realised thanks to the different surface shapes of the covering shells, the choice in colours and the visible and concealed fixing. In terms of its geometry and joint design the sandwich panel wall is optimally adapted to the intended use. This ensures best airtightness values and the highest thermal insulation requirements are met. For technical reasons, it is possible that the panel joint may vary depending on the production plant and core thickness. We recommend the use of load distribution plates (LVP)* for the installation of O-METALL^® wall panels with concealed fixing.

SUITABLE ACCESSORIES