PRODUCT PROPERTIES – THE FAVORABLE SANDWICH PANEL
|CORE THICKNESS (h)*||mm||30||40||60||80||100||120|
|TOTAL THICKNESS (hg)**||mm||70||80||100||120||140||160|
*Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.
**Approximate data: There can be a difference of up to ± 5mm in the corrugation height depending on the production line used.
|OUTER SHELL||O-METALL® corrugated sheet, heat-treated fully galvanised steel|
Material thicknesses between 0,40 and 0,80mm
Colour coating 25μm polyester
|INSULATION CORE||CFC-free polyurethane hard foam (PUR), density approx. 40kg/m³ or|
HCFC-free polyisocyanurate hard foam (PIR), density approx. 40kg/m³
|INNER SHELL||Aluminium foil with robust stucco structure (ALF) or|
Roofing felt base with special bitumen (BI) or
Glass fibre reinforced plastic (GFRP)
|PRODUCTION LENGTH||Continuously from 2,00 to 13,60m, Special lengths upon request|
|OTHER||Inner shell ammoniac resistant|
Minimum production quantity 200m², for DP150 to DP200 1000m²
|OPTION (on request)||Foam back-cut between 70 and 500mm, mounting direction freely selectable|
Various coating systems up to 200μm for outer shell
Outer shell in aluminium available – colours upon request
Production and transport of excess lengths
STANDARD COLOURS (0,50mm)
Attention: Colour deviations possible. For exact colour representation please use a RAL card.
|O-METALL® profit panel roof is the cheapest sandwich panel with upper and lower shell. It is particularly suitable for agricultural buildings, renovations and for buildings where a particularly light and robust roof covering is required. Depending on the requirements, our profit panel is available with an inner shell made of aluminium foil (ALF), bitumen foil (BI) or glass fibre plastic (GFK).|